ACE100-29 Wireless Temperature Measuring Sensor
OVERVIEW
ACE100 wireless temperature and current compounding transformer is mainly used for monitoring and measuring the temperature and current of low-voltage switchgear transmission cables. The product uses dual power supply mode of battery inside and electromagnetic energy, which provides a fast and accurate measurement of temperature and current data of low voltage cables, then transmits the data to the receiver through wireless. The product is easy to install, can comprehensively test cable data and helps users to find hidden dangers in the line as early as possible, ensures power supply safety and realize intelligent distribution network.
MAIN PARAMETERS
Wireless temperature sensor |
||
Technical Parameters |
Specifications |
|
Measurement rage |
Temperature |
-50℃~125℃ |
Current |
1~400A,AC |
|
Accuracy |
Temperature |
±1℃ |
Current |
1%FS |
|
Resolution ratio |
Temperature |
0.1℃ |
Current |
0.01A |
|
Acquisition and transmission cycle |
electromagnetic energy :10~30S;battery:3min |
|
electromagnetic energy start-up current |
2.5A,AC |
|
Battery life |
3 years(25℃),changeable(Type: CR2450) |
|
Ratio frequency |
470Mhz |
|
Transmission distance |
150m(outdoor) |
|
Operating environment |
-40~85℃ |
|
Installation method |
Snap-in type |
|
Installation cable diameter |
6~29mm |
|
Transceiver |
||
ACREL Model |
ATC600 |
|
Power supply |
AC/DC 110V/220V |
|
Installation |
Din rail 35mm |
|
Communication |
Modbus RTU RS485 |
|
Extra function |
Alarm output 2DO |
DIMENSION
DISPLAY
Benefits Of ACE100-29 Wireless Temperature Sensor
• Wireless transmit, 470MHz
APPLICAITON
Applicaiton Scenarios
Low voltage switch cabinet outlet cable temperature and current monitoring
There is a contact resistance at the outlet cable joint of the low-voltage switch cabinet. When the passing current is large, it is easy to generate heat and should be the main monitoring object.
For safety reasons, it is recommended to use wireless temperature and current comprehensive monitoring. Install the ACE100 on the outlet cable, and transmit the collected temperature and current data to the ATC600-C wireless temperature measurement transceiver through wireless signals. It can also be used with the ATP series touch screen to display the temperature and current locally.
Introduction |
|
Wireless temperature measurement terminal |
ATC600-C wireless temperature measurement transceiver |
Temperature Sensor |
ACE100-29, battery/induction power dual power supply temperature and current composite sensor |
Installation method |
Clamp the yellow, green and red ACE100-29 on the outlet cable of the low-voltage switch cabinet |
|